Economy Dual Channel Universal Signal Converter, SAE J1939, 1 Mbps
Item # AX130520-02 — Economy Dual Channel Universal Signal Converter, SAE J1939, 1 Mbps
The Economy Dual Channel Universal Signal Converter accepts two voltage, current, resistive, frequency, RPM, PWM, or digital control signal inputs and converts them into two signal outputs (voltage, current, frequency, PWM, mixed, or digital). A +5V reference powers sensor inputs. The control can be connected to a CAN (SAE J1939) networked engine control system.
Our products are designed to be customized by our customers and can be thought of as product foundations. Find the foundational product(s) that you need in our catalog, add them to your quote cart, then explain your requirements for your project on the quote cart submission form. If you cannot find the foundational product, please tell us your requirements.
Technical Specifications
Economy Dual Channel Universal Signal Converter, SAE J1939, 1 Mbps
Order Code
P/N: AX130520-02 (SAE J1939, 1 Mbps)
No. of Input(s)
2
Input(s)
2 universal signal inputs configurable as follows.
0-5V, 0-10V
0-20mA, 4-20mA, 0-200mA
20 Ohm - 250 kOhm
Frequency/RPM
PWM
Digital (Active High, Active Low)
No. of Output(s)
2
Output(s)
2 outputs user programmable as follows
0-5V, 0-10V
0-20mA, 4-20mA
Frequency, PWM, or mixed
Digital
Reference Voltage(s)
+5V, 50 mA
Communications
1 CAN port (SAE J1939)
CAN Baud Rate
1 Mbit/s
Operating Voltage
12 Vdc or 24 Vdc nominal (9…36 Vdc power supply range)
Shutdown voltage is 8.0 Vdc
Isolation
Power and CAN are isolated from each other (300 Vrms).
Control Logic
Standard embedded software is provided.
Enclosure
High temperature nylon housing
TE Deutsch P/N: EEC-325X4B
Connection(s)
12 pin TE Deutsch integral connector P/N: DTM13-12PA-R008.
A mating plug kit is available as Axiomatic P/N: PL-DTM06-12SA.
Protection Rating
IP67
Operating Temperature
-40 to 85 ºC
-40 to 185 ºF
Applications
Power Gen Set Engine Control Systems
Oil and Gas Equipment Automation
Off-highway Machine Automation
Accessories
PL-DTM06-12SA, Mating Plug KIT (DTM06-12SA, WM-12S, 12 Contacts, 6 Plugs)
AX070502, Axiomatic Electronic Assistant KIT (AX070501 USB-CAN Converter, 2 Cables, Installation Instructions)
AX070506K, Axiomatic Electronic Assistant KIT III (AX070506 USB-CAN Converter, 3 Cables, Installation Instructions)
Datasheet
User Manual
2D Drawing
STEP File
Compliance
4 Inputs, 8 Proportional Outputs Valve Controller, CANopen®
20 Channel Thermocouple Scanner, Full Isolation, SAE J1939
4 Digital Inputs Modbus Router, Modbus TCP/IP, SAE J1939
4 Universal Signal Outputs CAN Controller, CANopen®, Compact
4 Universal Input CAN Controller, +5V/8V Reference with Feedback Signal, CANopen®
Wire Harness (DTP06-4S Mating Plug, 2m (6.5ft.) 12 AWG Unterminated Wires)
4 Inputs, 4 Outputs Isolated Controller, SAE J1939
2 RTD Inputs, 2 Outputs Intelligent Load Control Switch, CANopen®, Modbus RTU, Ethernet, Wi-Fi
12 Inputs, 12 Proportional & 2 Relay Outputs Controller, 2 SAE J1939, Ethernet
Interface Module, 16 Inputs, 15 Outputs, SAE J1939
Center Bonded Mounts STA Series
Automation
Power Management
Connectivity Solutions
Machine Control
Accessories