4 Inputs, 2 Bidirectional 0-400 mA Outputs Valve Controller, CANopen®, DIN Rail Mount
Item # AX024011 — 4 Inputs, 2 Bidirectional 0-400 mA Outputs Valve Controller, CANopen®, DIN Rail Mount
The 4 Input 2 Output Servo Controller series (CANopen®) is designed for versatile control of two servo outputs to directly drive servos or other loads. Controller’s flexible circuit design gives the user a wide range of configurable input types. The powerful control algorithms allow the user to program the controller for a wide range of applications without the need for custom software.
The controller has two Universal inputs that can be configured to measure analog voltage or current, frequency/PMW or digital signal and two Analog inputs that can be configured to measure current and both positive and negative voltages. Measured input data can be sent to a CAN Network or used to drive outputs directly or through the configurable control algorithms.
The servo outputs are of H-bridge type with capability of driving up to 400mA through the load in both directions. Both outputs can be configured to use any of the on-board inputs as either a control signal or an enable signal as well as CAN Network data.
Our products are designed to be customized by our customers and can be thought of as product foundations. Find the foundational product(s) that you need in our catalog, add them to your quote cart, then explain your requirements for your project on the quote cart submission form. If you cannot find the foundational product, please tell us your requirements.
Input(s)
2 analog signal inputs are selectable as the following voltage or current signals (Inputs 1 & 2):
0-5V, 0-10V, 0 to +/- 5V, 0 to +/- 10V, 4-20mA, or 0-20mA
2 analog/digital inputs are available as the following signals (Inputs 3 & 4):
0-5V, 0-10V, 4-20 mA, 0-20 mA, PWM, Frequency, or Digital (Active High or Active Low)
Output(s)
2 bidirectional outputs (+/- 400 mA), independent, user selectable as: Servo Valve Control or Proportional Current (+/- 10mA to +/-400 mA)
Reference Voltage(s)
One +5V, 100mA, 1%
Communications
1 CAN port (CANopen®)
CAN Baud Rate
Selectable
Operating Voltage
12VDC or 24VDC Nominal (9...36 VDC)
Control Logic
Standard embedded software is provided.
A user programmable functionality is accessible.
Enclosure
DIN rail TH 35-7.5
PHO ME MAX 22.5 2-2 KMGY – 2713625 (vented) or Phoenix Contact: ME MAX 22,5 G 2-2 KMGY – 2713638
Polyamide, UL94V0
cULus recognized, China RoHS
Operating Temperature
-40 to 85 ºC
-40 to 185 ºF
Applications
Servo valve control in motion control, industrial automation
Datasheet
User Manual
EDS File
2D Drawing
STEP File
10 Universal Signal Inputs Controller, +5V Reference, SAE J1939
4 Inputs, 8 Proportional Outputs Valve Controller, CANopen®
20 Channel Thermocouple Scanner, Full Isolation, SAE J1939
4 Digital Inputs Modbus Router, Modbus TCP/IP, SAE J1939
4 Universal Signal Outputs CAN Controller, CANopen®, Compact
4 Universal Input CAN Controller, +5V/8V Reference with Feedback Signal, CANopen®
Wire Harness (DTP06-4S Mating Plug, 2m (6.5ft.) 12 AWG Unterminated Wires)
4 Inputs, 4 Outputs Isolated Controller, SAE J1939
2 RTD Inputs, 2 Outputs Intelligent Load Control Switch, CANopen®, Modbus RTU, Ethernet, Wi-Fi
12 Inputs, 12 Proportional & 2 Relay Outputs Controller, 2 SAE J1939, Ethernet
Interface Module, 16 Inputs, 15 Outputs, SAE J1939
Center Bonded Mounts STA Series
Automation
Power Management
Connectivity Solutions
Machine Control
Accessories