20 PT1000 RTD Module, SAE J1939
Item # AX184200 — 20 PT1000 RTD Module, SAE J1939
The 20 PT1000 RTD Scanner monitors 20 2-wire PT1000 inputs from a diesel engine and the temperature information is provided to the engine control system over a SAE J1939 CAN bus. Temperature information can include exhaust temperature, winding temperature, and fluid temperature. All channels of temperature data are automatically sent over the CAN bus when power is applied with no additional programming or configuration required. The RTD Scanner is designed to meet the environmental, EMC and vibration requirements of vehicle and power generator set applications.
Our products are designed to be customized by our customers and can be thought of as product foundations. Find the foundational product(s) that you need in our catalog, add them to your quote cart, then explain your requirements for your project on the quote cart submission form. If you cannot find the foundational product, please tell us your requirements.
Technical Specifications
Twenty (20) 2-wire PT1000 Inputs CAN, SAE J1939
Order Code
P/N: AX184200
RTD Input(s)
20 Inputs (200 - 4000 Ohms, Suitable for Pt1000)
CAN Port(s)
1 SAE J1939 port
Operating Voltage
12V, 24V or 48Vdc Nominal (8 to 65 VDC Power Supply Range)
Enclosure
Rugged Aluminum Housing, Stainless Steel End Plates, Neoprene Gaskets
142.88 x 149.00 x 73.00 mm
5.63 x 5.86 x 2.87 inches
(L x W x H)
Protection Rating
IP67
Operating Temperature
-40 to 85 ºC
-40 to 185 ºF
Accessories
AX070210, Mating Plug KIT (DRC16-40S, 40 Contacts)
PL-DTM06-12SA, Mating Plug KIT (DTM06-12SA, WM-12S, 12 Contacts, 6 Plugs)
AX070502, Axiomatic Electronic Assistant KIT (AX070501 USB-CAN Converter, 2 Cables, Installation Instructions)
AX070506K, Axiomatic Electronic Assistant KIT III (AX070506 USB-CAN Converter, 3 Cables, Installation Instructions)
Datasheet
User Manual
2D Drawing
STEP File
Compliance
4 Inputs, 8 Proportional Outputs Valve Controller, CANopen®
20 Channel Thermocouple Scanner, Full Isolation, SAE J1939
4 Digital Inputs Modbus Router, Modbus TCP/IP, SAE J1939
4 Universal Signal Outputs CAN Controller, CANopen®, Compact
4 Universal Input CAN Controller, +5V/8V Reference with Feedback Signal, CANopen®
Wire Harness (DTP06-4S Mating Plug, 2m (6.5ft.) 12 AWG Unterminated Wires)
4 Inputs, 4 Outputs Isolated Controller, SAE J1939
2 RTD Inputs, 2 Outputs Intelligent Load Control Switch, CANopen®, Modbus RTU, Ethernet, Wi-Fi
12 Inputs, 12 Proportional & 2 Relay Outputs Controller, 2 SAE J1939, Ethernet
Interface Module, 16 Inputs, 15 Outputs, SAE J1939
Center Bonded Mounts STA Series
Automation
Power Management
Connectivity Solutions
Machine Control
Accessories