4 Digital Inputs Modbus Router, Modbus TCP/IP, SAE J1939
Item # AX141840 — 4 Digital Inputs Modbus Router, Modbus TCP/IP, SAE J1939
The 4 Digital Inputs Modbus Router, AX141840, acts as a CAN to Modbus TCP/IP router, featuring fast bi-directional data exchange between Ethernet (Modbus TCP/IP) and an SAE J1939 CAN network. The Modbus router operates with an input voltage of 12 or 24 VDC nominal (9 to 30 VDC) from a battery or other source of power. The AX141840 router provides Ethernet communication at 10 or 100 Mbit/s (10BASE-T and 100BASE-Tx compliant), features auto-baud-rate detection, and accepts 4 digital inputs, selectable as frequency/RPM, PWM duty cycle, digital on/off, or encoder. The conversion logic setup is highly application specific, although firmware updating and parameter configurability is accessible using a web browser. Some parameters like device IP address, Modbus port, and ECU address are user configurable via the Axiomatic Electronic Assistant (sold separately). The AX141840 Modbus Router is designed for communication interface between machine and master control systems. The unit is compact, fully sealed, and IP67 rated for applications such as machine automation and control panels.
Our products are designed to be customized by our customers and can be thought of as product foundations. Find the foundational product(s) that you need in our catalog, add them to your quote cart, then explain your requirements for your project on the quote cart submission form. If you cannot find the foundational product, please tell us your requirements.
Technical Specifications
4 Digital Inputs Modbus Router, Modbus TCP/IP, SAE J1939
Order Code
P/N: AX141840
No. of Input(s)
4
Input(s)
4 digital inputs, user selectable as follows:
Frequency/RPM (0.5 Hz to 10 kHz)
PWM duty cycle (0-100%)
Digital on/off
Encoder (0-20 kHz)
Input pairs 1 & 2 and/or 3 & 4 can be configured to read quadrature, incremental, or standard A & B phase encoder signals.
No. of Communication Port(s)
2
CAN Port(s)
1 SAE J1939 port
CAN Baud Rate
250 kbit/s, 500 kbit/s, 667 kbit/s, and 1 Mbit/s with auto-baud-rate detection
Ethernet Port(s)
1 Ethernet port (Modbus TCP/IP)
10/100 Mbit/s, 10BASE-T/100BASE-Tx compliant
Auto-MDIX
Auto-negotiation and full-duplex supported with 100BASE-Tx
Operating Voltage
12/24 VDC nominal (9-30 VDC)
Control Logic
Standard embedded software is provided.
A user programmable functionality is accessible.
Enclosure
Molded enclosure, integral connector
Nylon 6/6, 30% glass, ultrasonically welded
Connection(s)
1x 12-pin connector, equivalent to TE Deutsch P/N: DTM04-12PA
Protection Rating
IP67
Operating Temperature
-40 to 85 ºC
-40 to 185 ºF
User Interface
Parameters are configurable using a web browser and firmware can also be updated using a web browser.
Some parameters like device IP address, Modbus port, and ECU address can be configured via the Axiomatic Electronic Assistant (EA), P/N: AX070502 or AX070506K
Applications
Communication interface between machine and master control systems
Control panels
Machine automation
Accessories
PL-DTM06-12SA, Mating Plug KIT (DTM06-12SA, WM-12S, 12 Contacts, 6 Plugs)
Datasheet
User Manual
2D Drawing
Compliance
4 Inputs, 8 Proportional Outputs Valve Controller, CANopen®
KIT (AX141530 Converter, AX070532 Cable, AX070534 Cable)
20 Channel Thermocouple Scanner, Full Isolation, SAE J1939
4 Digital Inputs Modbus Router, Modbus TCP/IP, SAE J1939
KIT (AX141560 Converter, AX070521 Cable, AX070522 Cable, AX070532 Cable)
4 Universal Signal Outputs CAN Controller, CANopen®, Compact
LIN/CAN Protocol Converter, Enhanced II, SAE J1939
LIN/CAN Protocol Converter, PWM Output, CANopen®
LIN/CAN Protocol Converter, Enhanced II, CANopen®
4 Universal Input CAN Controller, +5V/8V Reference with Feedback Signal, CANopen®
Center Bonded Mounts STA Series
Automation
Power Management
Connectivity Solutions
Machine Control
Accessories