Hydraulic Valve Drivers & Controllers
Browse by Product Category
Tell Us Your Requirements
DIN 43650A Valve Controllers & Amplifiers
Many of Axiomatic's Hydraulic Valve modules feature a DIN 43650A style contact for the purpose of mounting directly onto a valve. A wide-variety of models are designed for each product to ensure there will be a product model best suited for your applications. Single Output Valve Controllers (3x SAE J1939 models, 1x CANopen® model & 1x Bluetooth® model) 4-20 mA Connector Amplifiers (3x 2m...
Plug-In Valve Controllers
The Plug-In Hydraulic Valve Controllers are distributed electronic controls. The plug-in style devices operate with a power supply voltage of 12 or 24 VDC nominal (8 to 36 VDC depending on the selected model). The controllers feature integral TE Deutsch equivalent connectors, are designed to be mounted directly on the hydraulic valve, and provide distributed control on the mobile machine. The unit...
CAN to Outputs Valve Controllers
The CAN to Outputs Valve Controllers accept an operating voltage of 12, 24, or 48 VDC nominal (depends on the selected model) and generate signal outputs. The number of outputs will vary based on the selected model. The controllers communicate via an SAE J1939 network or a CANopen® network. The CAN controllers are user configurable using standard CANopen® interface tools (not supplied) for CANop...
Proportional Output Controllers with Signal Inputs
The Hydraulic Valve controllers featured on the page can be configured to produce proportional outputs of up to 2.5 A or 3 A, depending on the selected model. The controllers feature a variety of selectable inputs and outputs such as voltage, current, and PWM. The quantity of inputs and outputs varies between models. All the controllers communicate via CAN bus (SAE J1939 or CANopen®) and are user...
Encoder Input, Dual Output Valve Controllers
The Encoder Input, Dual Output Valve Controllers are designed for extremely versatile control of up to two proportional outputs to directly drive loads. The controllers accept two inputs to command the valve driver and communicate via a CAN network. The Dual Output Valve Controllers are user configurable using stand CAN interface tools (not supplied). The Encoder Input, Dual Output Valve Controlle...
Digital On/Off Valve Controllers
The digital on/off hydraulic valve controllers generate digital on/off outputs up to 4 A or 5 A, depending on the selected model. The quantity of inputs and outputs varies between models. All the controllers communicate via CAN bus (SAE J1939 or CANopen®) and are user configurable via standard CANopen® interface tools (not supplied) or the Axiomatic Electronic Assistant. The controllers are desi...
Dual Servo Valve Controllers
These servo valve controllers provide full H-bridge servo outputs or bidirectional proportional current outputs to control servo valves, proportional valves, or actuators. An isolated CAN port is provided for machine networking. The powerful control algorithms allow users to program the controllers for a wide range of applications. A rugged power supply interface accepts 8 to 36 VDC and is appropr...
Controllers with Near Field Communications (NFC)
The controllers with Near Field Communications (NFC) operate with an input range of up to 36 VDC. The controllers are user configurable via the E-Write NFC application available for download from Google Play and Apple App stores for a fee. Axiomatic has a number of controllers with NFC models available, with a variety of operating voltages, inputs, outputs, and enclosures, ensuring you have the co...
Remote Mount Solenoid Drivers, PCB or Metal Box
The Remote Mount Solenoid Drivers simplify control of proportional solenoids by supplying a current proportional to a 0-5 V, 0-10 V, or a 4-20 mA input signal. The solenoid drivers accept power supply voltages from 9 to 28 VDC. The drivers utilize high frequency switching output (PWM) to provide a DC current output. The options for current output include 2 A, 1.2 A, 800 mA, 600 mA, and 400 mA. A c...
Remote Solenoid Drivers, 1 Analog Input, 1 Output, DIN Rail Mount
The Remote Mount Solenoid Drivers simplify control of proportional solenoids by supplying a current proportional to an input control. The solenoid drivers accept power supply voltages from 9 to 28 VDC. The linear solenoid drivers utilize high frequency switching output (PWM) to provide a direct current (DC) output. The options for current outputs include 2 A, 1.2 A, and 400 mA. A current sensing c...
DSDA-SMB-x Dual Solenoid Multifunction Valve Drivers
The Dual Solenoid Multifunction Valve Driver provides accurate control of hydraulic proportional and directional valves used in mobile equipment and industrial processes, with input from a joystick, potentiometer or control system interface. This multifunctional design will support inputs from a joystick potentiometer with or without center tap, a standard potentiometer or commonly available contr...
Pulsar Valve Controller, SAE J1939, 250kbps
The Pulsar Valve Controller features Two (2) signal inputs are selectable as bipolar or unipolar voltage, current, digital, PWM or Frequency signal types. Four (4) independent outputs to drive pulse type valves (0-2.0A) are factory set. Two LED indicators. It has a protection rating of IP20. The valve driver is configurable via Electronic Assistant.
12V or 24V Hot Shot Solenoid Protection Controllers
The Hot Shot solenoid protection controllers are designed to drive one hydraulic valve. The controllers either accept an input voltage of 12 VDC nominal (8 to 24 VDC) and generate an output up to 2 A or accept an input voltage of 24 VDC nominal (10 to 36 VDC) and generate an output up to 1 A, depending on the selected model. The units are are compact in a plug-in style enclosure for valve coils an...
Economy Valve Controllers, DIN Rail Mount
The single input, single output economy valve controllers simplify control of proportional solenoids by supplying a current proportional to an input control of 0-5 VDC, 10 K potentiometer, or 4-20 mA. The economy valve controllers accept power supply voltages from 9 to 32 VDC. This linear solenoid driver utilizes high frequency switching output (PWM) to provide a direct current (DC) output. A curr...
Single Output Plug-In Valve Controller
The Single Plug-In Hydraulic Valve Controller is a user programmable distributed electronic control. The machine designer can configure the electronic control for their agricultural equipment or construction machine application. It drives one proportional hydraulic solenoid in response to a single command input signal from a joystick, potentiometer or other input. The control is designed to be mou...
CAN to 1 Output Valve Controllers
The single valve controllers feature 1 PWM proportional (0-2 A) or on/off output (0-3 A). It has a 12, 24, or 48 VDC input power (nominal) with reverse polarity and transient protection. These valve controllers are EMC compliant.
CAN to 1 Output Valve Controller, DIN 43650A
The valve controller supplies one proportional solenoid coil with current proportional to a CAN input message. All calibration settings are managed by a microprocessor for accurate control of hydraulic and pneumatic proportional solenoid valves used in mobile construction equipment and industrial processes. The control has DIN 43650A mounting and an IP67 rating.
CAN to 2 Outputs Valve Controllers
The CAN to dual outputs valve controllers are highly programmable controllers, allowing the user to configure them for their application. The controllers operate from a battery or other power source of 12 or 24 VDC nominal (9 to 36 VDC). The controllers must be integrated into either an SAE J1939 or CANopen® network of controllers, depending on the model. The valve controllers are user configurab...
Dual Output Plug-In Valve Controllers
The Dual Plug-In Hydraulic Valve Controllers are user programmable distributed electronic controls. The machine designer can configure the electronic controls for their agricultural equipment or construction machine application. The sophisticated control algorithms allow for open or closed loop drive of the proportional outputs to actuate hydraulic solenoids. The controllers are designed to be m...
CAN to 4 Outputs Valve Controllers
These controllers feature 1 CAN port for controlling the outputs over the CAN bus. They accept a nominal input power supply voltage of 12 or 24 VDC. Using the CAN network, they can provide control of up to four outputs, configure a wide variety of responses and up to 2.5 A per channel. For example, they can drive proportional valves, on/off valves, or provide a hotshot control profile. PWM signal ...
CAN to 6 Output Valve Controllers
The controllers drives up to 6 on/off valves at 5 Amps over a CAN network. Alternatively, the user can select pulsed, timed or PWM output types. It accepts up to 2 analog inputs (0-5 v, 0-20 mA or 4-20 mA) and 3 digital inputs for connection to a variety of analog machine sensors or levers. The user can also select PWM, Frequency/RPM or 16-bit Counter inputs. Each input can be configured to measur...
10 Outputs Valve Controllers
The valve controllers feature ten (10) independent user configurable outputs to drive valves (0-2.5 A). Output type is high side sourcing or low side sinking. Configurable via CAN interface tools.
CAN to 10 Outputs Valve Controllers
The 10 Outputs Controllers feature 1 CAN port for controlling the outputs and diagnostics over the CAN bus. The CAN controllers accept a nominal input power supply voltage of 12, 24, or 48 VDC depending on the selected model. Using the CAN network, the controllers can provide control of 10 outputs up to 2.5 A per channel. Standard software is provided. The sophisticated microprocessor can accommod...
Universal Input, Single Output Valve Controllers, Near Field Communications (NFC)
The Universal Input, Single Output Valve Controllers accept one command signal input and generate an output of up to 3 A or 5 A (depending on the model) to drive a solenoid. Using Near Field Communication (NFC), the wireless valve controllers feature many control profile parameters that are user configurable via the E-WRITE NFC smartphone application. The valve controllers are designed to interfac...
1 Universal Input, 1 Output Valve Controllers with LED
The Universal Input to Single Output Valve Controller with LED is designed for versatile control of a universal input and a proportional valve output. Its flexible hardware design allows for the controller to have a wide range of input and output types. The sophisticated control algorithms/logical function blocks allow the user to configure the controller for a wide range of applications without t...
Single Input, Dual Outputs Valve Controllers
The 1 universal input, dual output valve controllers are highly programmable electronic valve controllers. The machine designer can configure the electronic control for their vehicle application. The sophisticated control algorithms allow for open or closed loop drive of the proportional outputs to actuate hydraulic solenoids. The valve controllers can be operated as either self-contained control ...
1 Digital Input, 2 Digital Outputs Valve Controllers with CAN
The 1 Digital Signal to 2 Digital Outputs Valve Controllers feature 1 digital signal input up to +Vps (ignition switch signal) and 2 digital outputs up to 4 A. They comes in compact, fully sealed enclosures with IP67 protection. These products meet the surge requirements of SAE J1445.
1 Universal Input, 2 Outputs, Valve Controller, Plug-In
The 1 Universal Input, 2 Outputs Plug-In Valve Controller is designed for extremely versatile control of up to two proportional outputs to directly drive coils or other inductive loads up to 2.0 Amps. The controller has one fully programmable universal input that can be setup to read a: voltage, current, resistive, or PWM input signal. The controller includes user selectable standard control profi...
2 Inputs, 2 Outputs Valve Controllers
The 2 inputs, 2 outputs valve controllers accept 2 fully universal inputs and generate 2 independent software controlled outputs. The controller inputs are user selectable as voltage, current, resistive, frequency, RPM, PWM, or digital and the controller outputs are user selectable as proportional voltage, proportional current, hotshot digital, PWM duty cycle, or digital on/off. The dual input, du...
Dual Input, Dual Output Valve Controllers, DIN Rail
The dual valve controllers are designed for extremely versatile control of up to 2 proportional outputs to directly drive coils or other loads. The sophisticated control algorithms allow the user to program the controller for a wide range of applications without the need for custom software. The controllers accept an input voltage of 12 or 24 VDC nominal for battery powered machine applications an...
4 Inputs, 2 Outputs, +/- 400 mA Valve Controllers
The 4 inputs, 2 outputs valve controllers generate 2 +/- 400 mA bidirectional outputs, user selectable as servo valve control or proportional current and are designed for versatile control of 2 servo outputs to directly drive servos or other loads. The flexible circuit design gives the users a wide range of configurable input types. The sophisticated control algorithms allow the users to program t...
4 Inputs, 2 Outputs, 3A Valve Controllers
The 4 inputs, 2 outputs valve controllers generate two outputs up to 3 A and are fully protected. The valve drivers are highly programmable, allowing the user to configure it for their application. All the controllers communicate via CAN bus (SAE J1939 or CANopen®) and are user configurable using standard CANopen® interface tools (not supplied) or the Axiomatic Electronic Assistant. Models AX022...
4 Inputs, 8 Proportional Outputs Valve Controllers
The 4 inputs, 8 proportional output controllers accept 4 universal command signal inputs as voltage, current, resistive, frequency, PWM, or digital from sensors, joysticks, switches, or push-buttons. The valve controllers provide 8 proportional outputs capable of 3 A for driving actuators, hydraulic valves, or motors and feature high or low side driving. Operating with machine battery power, the c...
6 Inputs, 5 Outputs Valve Controllers
The valve controllers generate precise, repeatable control of five proportional or on/off solenoids over an SAE J1939 CAN bus network and accept four analog/digital/PWM inputs and two frequency/digital inputs for interfacing to a PLC, Engine Control Module, or command potentiometers. A power input voltage of 12 or 24 VDC nominal (8 to 36 VDC) is necessary for operation. Diagnostics messages are pr...
7 Input, 5 Output Valve Controller, SAE J1939
The valve controller provides precise, repeatable control of 5 proportional or on/off solenoids over a SAE J1939 network. PWM signal, frequency/RPM or digital inputs as well as analog voltage, current and resistive inputs are accepted for interface to a PLC, Engine Control Module or command potentiometers.
7 Digital Inputs, 6 Digital & 4 LED Outputs Controllers
The 7 Digital Inputs, 6 Digital & 4 LED Outputs Controllers feature seven digital signal inputs and drive six on/off valves and four LEDs. The controllers are ruggedly designed for EMC compliance and are suitable for the environmental and vibration requirements of off-highway equipment applications. Flexible user programming for application specific control logic is via standard CAN interface ...
8 Input, 5 Output Valve Controllers
The Hydraulic Valve Controller is a highly programmable electronic control with 8 inputs and 5 outputs. The machine designer can configure it for their mobile application such as off-highway vehicles or on-road vehicles. Its sophisticated control algorithms allow for open or closed loop drive of the proportional outputs. It can be operated as either a self-contained control system, driving the out...
12 Inputs, 12 Outputs Valve Controllers
The 12 Input, 12 Output Valve Controllers accept twelve inputs and generate twelve proportional outputs that can provide a current of up to 2.5 A. The flexible circuit design of the controllers gives the user a wide range of configurable input and output types. The 12 Input, 12 Output Valve Controllers communicate via CANopen® or SAE J1939 and have powerful control algorithms that allow the user ...
CAPVE-H-5V-XA-5C-2M Economy Connector Amplifiers for Proportional Valves
The CAPVE-H economy connector amplifiers simplify control of proportional solenoids by supplying a current proportional to an input control of up to 5 VDC or 10 K potentiometer. The economy connector amplifiers accept power supply voltages from 9 to 32 VDC. The linear solenoid drivers utilize high frequency switching output (PWM) to provide a direct current (DC) output. A current sensing circuit m...
CAPV-H-5V-x Connector Amplifier For Proportional Valves
The Connector Amplifier simplifies control of proportional solenoids by supplying a current proportional to an input control (0-5V or 0-20mA or 10K potentiometer or pre-set level). It accepts power supply voltages from 9 to 28VDC. This linear solenoid driver utilizes high frequency switching output (PWM) to provide a DC current output. The options for current output include 2A, 1.2A, 800mA or 600m...
CAPV-H-10V-X Connector Amplifiers for Proportional Valves
The 0-10 V Connector Amplifier simplifies control of proportional solenoids by supplying a current proportional to an input control (0-10 V or 0-20 mA). It accepts power supply voltages from 9-28 VDC. This linear solenoid driver utilizes high frequency switching output (PWM) to provide a DC current output. The options for maximum current output include 2 A, 1.2 A, 800 mA, or 600 mA. A current sens...
CAPV-H-4-20MA-X Connector Amplifiers for Proportional Valves
The CAPV-H connector amplifiers simplify control of proportional solenoids by supplying a current proportional to an input control of 4-20 mA. The connector amplifiers accept 9 to 28 VDC power supply voltage. The linear solenoid drivers utilize high frequency switching output (PWM) to provide a direct current (DC) output. The options for maximum current output include 2 A, 1.2 A or 600mA. A curren...
SSD-H-t-02-x-yM Soft Shift Controllers
The Soft Shift Controller introduces a current ramp permitting the soft start of proportional solenoid valves used for pressure or flow control in hydraulic circuits. When the unit is powered on, it ramps to full current output over the ramp on time period that is adjustable within a factory set range. When the power is switched off, output of the unit falls immediately to zero. It is available in...
3A Solenoid Drivers
The 3 Amp Solenoid Drivers simplify control of proportional solenoids by supplying a current proportional to a user selectable input control. They are suited for industrial applications interfacing with a PLC. This linear solenoid driver line-up utilizes high frequency switching output (PWM) to provide a DC current output. Output is user selectable as 0 to 3 Amps or 0 to +/- 3 Amps. A current sens...
Remote Mount Solenoid Driver (0-5 Vdc/0-20 mA/10 K Potentiometer Input)
The Remote Mount Solenoid Driver simplifies remote control of proportional solenoids. The unit accepts 0-5 VDC, 0-20 mA or 10K potentiometer control inputs and a wide range of power sources from 9-28VDC. This linear solenoid driver utilizes high frequency switching output (PWM) to provide a DC current. Maximum current output options are 2 Amps, 1.2 Amps, 600 mA or 400 mA. The user can adjust maxim...
Remote Mount Solenoid Driver (0-10 Vdc Input DC)
The Remote Mount Solenoid Driver simplifies control of proportional solenoids by supplying a current proportional to an input control (0- 10 V). It accepts power supply voltages from 9 to 28 VDC. This linear solenoid driver utilizes high frequency switching output (PWM) to provide a DC current output. The options for current output include 2 A, 1.2 A, 800 mA, 600 mA or 400 mA. A current sensing ci...
Remote Mount Solenoid Driver (4-20 mA Input)
The Remote Mount Solenoid Driver simplifies control of proportional solenoids by supplying a current proportional to a 4-20 mA input signal. It accepts power supply voltages from 9 to 28 VDC. This linear solenoid driver utilizes high frequency switching output (PWM) to provide a DC current output. The options for current output include 2 A, 1.2 A, 800 mA, 600 mA or 400 mA. A current sensing circui...
Can’t find what you’re looking for?
We offer fresh design ideas and rapid prototyping that caters to the needs of OEM’s from different industries relying on battery-powered control systems. Contact us for customization or new product design.
Tell Us Your RequirementsFeatured Hydraulic Valve Drivers & Controllers
4 Inputs, 8 Proportional Outputs Valve Controller, CANopen®
Dual Servo Valve Controller, +/-200 mA, 2 Outputs, SAE J1939
4 Inputs, 8 Proportional Outputs Valve Controller, SAE J1939
Universal Input, Single Output (3A) Valve Controller, Near Field Communications, PCB Assembly with Screw Terminals
Universal Input, Single Output (3A) Valve Controller, Near Field Communications, Metal Box, PG9 Strain Relief
Universal Input, Single Output (3A) Valve Controller, Near Field Communications, Metal Box, 1.5 m Cable
Universal Input, Single Output Valve Controller, Near Field Communications
Universal Input, Single Output (5A) Valve Controller, Near Field Communications, PCB Assembly with Screw Terminals
Center Bonded Mounts STA Series
All Product Categories
Automation
Power Management
Connectivity Solutions
Machine Control
Accessories
- Flat Top Recessed Bumpers
- Rounded Top Recessed Bumpers
- Large Bumper Pads
- Grommet Bumper A
- Flat Top Recessed Bumpers
- Rounded Top Recessed Bumpers
- Large Bumper Pads
- Grommet Bumper A
- Flat Top Recessed Bumpers
- Rounded Top Recessed Bumpers
- Large Bumper Pads
- Grommet Bumper A
- Flat Top Recessed Bumpers
- Rounded Top Recessed Bumpers
- Large Bumper Pads
- Grommet Bumper A
