The RTC Module permits time and date information with a battery backed up Real-Time-Clock (RTC). It has one universal signal input and CAN bus ports. The universal input can interface with a command signal (0-5V; 0-10V; 4-20 mA; Frequency or PWM) or it can serve as “clock synchronization” trigger. For example, the RTC date and time could only be set when the input is triggered. The battery bac...
Axiomatic offers a range of rugged Ethernet Switches. The number of ports, transmission speed, and enclosure depends on the model. Many of these devices operate as an unmanaged switches capable of handling communication with multiple Ethernet devices simultaneously. Some models can communicate at up to 10 Gigabit per second (Gbps) and have LEDs to indicate the state of the individual ports.
The Ethernet Switches operate as unmanaged switches that are capable of handling the communication of different Ethernet capable devices. The devices can be utilized to reduce machine cabling. The devices have LED indicators showing the status of each port. The Ethernet switches in this category can be powered through the power input port with an input voltage of 12 or 24 VDC nominal.
The Automotive Ethernet Converters in the category provide purely physical, bi-directional conversions between Automotive Ethernet, Ethernet, CAN, Wi-Fi, and Bluetooth® networks via PHY transceivers. Automotive Ethernet networks use a 2 wire, twisted pair cable saving on cabling costs for the machine builder. The Automotive Ethernet to Ethernet converters support baud rates of up to 1000 Mbit/s d...
The Axiomatic Automotive Ethernet to CAN Converter provides a purely physical, bi-directional conversion between Automotive Ethernet (100BASE-T1) and CAN 2.0B via PHY transceivers. No packets are stored or modified in this device. The Automotive Ethernet fieldbus supports bit rates of 100 Mbps and the CAN bus supports baud rates up to 1 Mbps. Status LEDs provide information on connection link, and...
The Automotive Ethernet to Ethernet Converters provide bi-directional conversion between Automotive Ethernet (1000BASE-T1), and Ethernet via PHY transceivers. Status LEDs provide information on connection link, and communication. The Automotive Ethernet to Ethernet Converters are designed for the harsh environments of off-highway or industrial equipment. Automotive Ethernet networks use a 2 wire, ...
The CAN Isolator/Router features a fast and bi-directional data exchange between 6 isolated CAN ports (CAN 2.0B). It can be configured as a switch to broadcast messages on all ports, and it is user configurable over the Web.
The protocol converters feature data exchange between a LIN network and a CAN network. The converters have a PWM output to connect to an annunciator, LED, or other device. The CAN/LIN converters have 1 CAN port, 1 LIN single pin port, and are operational from 9 to 32 VDC. The enclosures are IP67 rated and are compact in size.
The CAN to Bluetooth® Modules transfer wireless data to a PC, smartphone, display, or tablet. The devices setpoints are user configurable using the CAN2BT or CAN2BLE configuration smartphone application, available in the Android and Apple iOS app stores. The CAN to Bluetooth® Modules communicate via SAE J1939 CAN protocol. The available models AX141155 and AX141156 support Bluetooth® Low Energy...
The Ethernet/CAN converters operate as simple data converters capable of handling communication between CAN bus and Ethernet IEEE 802.3, IP ICMP, ARP, UDP, TCP, HTTP or proprietary protocols. They can interface with SAE J1939, CANopen®, or CAN FD (Flexible Data-rate) depending on the model of the device. Communication can occur in both directions. The Ethernet port can communication up to 100 Mbp...
The Protocol Conversion features fast data exchange between a CAN network (SAE J1939), RS-485 (Modbus RTU) and Ethernet (Modbus TCP/IP). Model Model AX141810 offers bidirectional Modbus (RTU+TCP/IP) to CAN protocol conversion. Model AX141830 acts as a CAN to Modbus (RTU+TCP/IP) router. It is user configurable using a web browser. The Modbus Router is enclosed in an IP67 rated housing with TE Deuts...
The Modbus to CAN converters operate as data converters capable of handling communication between CAN bus and Modbus devices on machines. Communication can occur in both directions. The Ethernet port is 10/100 Mbit/s. The CAN port can support high speed CAN with a baud rate of up to 1 Mbps. These devices can interface with SAE J1939 or CANopen®. The CAN protocol is user configurable using standar...
The Protocol Converter utilizes bi-directional message conversion between SAE J2497 and SAE J1939, with 1 isolated CAN port (SAE J1939) accompanied by auto-baud-rate detection. It is configurable with the Electronic Assistant. It comes in a fully sealed compact enclosure with a rugged IP67 protection rating.
The Protocol Converters with CAN and Modbus RTU or J1587 gateway between two CAN ports and one RS-422 / RS-485 port. Supported CAN bus communications include SAE J1939 and CANopen®. Each model only supports communication with Modbus RTU or SAE J1587. The protocol converters operate from a 12 VDC or 24 VDC nominal input power (9 to 36 VDC). The converters provide isolation to only the CAN bus comm...
The Protocol Converter comes pre-programmed with standard protocol conversion logic for bidirectional data exchange between Ethernet (proprietary TCP communications), RS-422 bus, RS-232 bus, RS-485 bus, and CAN network (SAE J1939). Data is forwarded “as-is” between the different serial ports. Also, CAN / Ethernet data is forwarded directly to serial interfaces with the configuration allowing t...
The Isolated Protocol Converters with CAN and Modbus RTU or J1587 gateway between two CAN ports and one RS-485 port. Supported CAN bus communications include SAE J1939 and CANopen®. Each model only supports communication with Modbus RTU or SAE J1587. The isolated protocol converters operate from a 12 VDC or 24 VDC nominal input power (9 to 36 VDC). The converters provide isolation to all communic...
The multi-functional interface CAN to Wi-Fi Converter enables a secure and reliable wireless connectivity, even in the harshest conditions. The converter is used in wireless CAN bus monitoring in off-highway, mining, industrial machines and control systems. It offers remote bi-directional CAN bus accessibility over a wireless link, and acts as a wireless bridge. The module has 1 CAN port for a ...
The Gigabit Ethernet Switches are designed for industrial and automotive applications requiring high performance 100/1000BASE-T1 Ethernet switch functionality. Each switch port can be individually configured to support Master or Slave mode with 1 Gbit/s or 100 Mbit/s communication speed according to IEEE 802.3bp and IEEE 802.3bw standards. The Ethernet part of the switch is not configurable, resul...
The CAN/Ethernet Isolators and Routers forward messages between CAN and Ethernet networks. They can be configured using the CAN interface or through a web browser via a built-in web server running on the device. The CAN ports have configurable power outputs that have a self-resettable fuse. All CAN interfaces have built-in 120 Ω termination resistors that can be enabled in the configuration. By d...
These Fiber Optic (FO) to CAN modules act as a converter or as a bridge and are best suited for power gen set engine control systems. The modules operate at 12 or 24 VDC nominal (8 to 36 VDC) and provide 2-way isolation for fiber optic and CAN. These modules feature LED indicators for FO status. The green LED indicates a connected status. The red LED indicates a disconnected/not working status. ...
The Axiomatic data logging technology provides fast and bi-directional data exchange between a variety of networks such as Ethernet, CAN, and RS-232. The devices provide data logging to an internal embedded Multi-Media Card (eMMC) for storing both the operating system and the logged data. The eMMC contains both Linux image and data logging partitions. A supercapacitor (supercap) provides backup po...
The CAN to USB converters have one high-speed USB 2.0 Type-C port (up to 480 Mbit/s) and one high-speed CAN port (with configurable baud rates up to 1 Mbit/s). All standard and extended CAN frames, including data and remote frames, are supported. Galvanic isolation of the CAN ports ensure no electrical interference between the HMI (or computer) and the equipment connected to the CAN port. The conv...
We offer fresh design ideas and rapid prototyping that caters to the needs of OEM’s from different industries relying on battery-powered control systems. Contact us for customization or new product design.
Tell Us Your RequirementsAutomation
Power Management
Connectivity Solutions
Machine Control
Accessories