Item # AX140970 — Dual CAN FD to Ethernet Converter
The AX140970 converter is a simple device that converts Classic CAN or CAN FD frames into UDP or TCP IP datagrams and sends them over an Ethernet network. The device can also convert UDP or TCP datagrams into Classic CAN or CAN FD frames and transmit them through any of the two CAN FD ports. The dual CAN FD to Ethernet converter runs on a Real-Time Operating System (RTOS) for low latency. The AX140970 converter has two galvanically isolated, independent CAN FD ports and one Ethernet port. The CAN FD ports support high-speed Classic CAN with data rates up to 1 Mbit/s or CAN FD with data rates up to 8 Mbit/s. The high-speed Ethernet port provides data rates up to 100 Mbit/s. All types of Classic CAN and CAN FD frames are supported. CAN FD ports can operate either in ISO or in Bosch frame format in the Flexible Data rate (FD) mode. The converter contains an embedded web server to set up configuration parameters and monitor the internal state of the converter using a web browser. The user can also update the converter firmware using the web browser. A simple command-line AxioDisc.exe Windows application is provided to locate a converter on the LAN.
To purchase the AX140970 Dual CAN FD to Ethernet Converter as a kit with mating cables, please visit: AX140970K — KIT (AX140970 Converter, 1x AX070531 Cable, 2x AX070532 Cables)
Our products are designed to be customized by our customers and can be thought of as product foundations. Find the foundational product(s) that you need in our catalog, add them to your quote cart, then explain your requirements for your project on the quote cart submission form. If you cannot find the foundational product, please tell us your requirements.
Technical Specifications
Dual CAN FD to Ethernet Converter
Order Code
P/N: AX140970
No. of Input(s)
0
No. of Output(s)
0
Output Voltage
9-36 VDC
Output Current
700 mA
No. of Communication Port(s)
3
Communications
2 isolated CAN ports (Classic CAN, ISO CAN FD, Non-ISO CAN FD)
1 Ethernet port (10/100 Mbit/s)
CAN/Ethernet communication is supported by the Axiomatic Ethernet-CAN Converter Software Support Package (sold separately), P/N AX140910
CAN Port(s)
2 isolated CAN ports support the following protocols:
Classic CAN (1 Mbit/s)
ISO CAN FD (8 Mbit/s)
Non-ISO CAN FD (8 Mbit/s)
CAN Baud Rate
Only Classic CAN supports the baud-rates below.
10 kbit/s, 20 kbit/s, 50 kbit/s, 83 kbit/s, 100 kbit/s, 125 kbit/s, 250 kbit/s, 500 kbit/s, 667 kbit/s, 800 kbit/s, and 1000 kbit/s
Ethernet Port(s)
1 Ethernet port (10/100 Mbit/s)
10BASE-T, 100BASE-TX (Ethernet IEEE 802.3 compliant)
Auto-configuration and full-duplex supported
Auto-crossover to eliminate cabling mismatch
Operating Voltage
12/24 VDC nominal (9-36 VDC)
Control Logic
A user programmable functionality is accessible.
Enclosure
Injection molded housing and cover
PA66, 30% glass fiber reinforced, laser welded
No. of Connections
3
Connection(s)
1x 8-pin M12 female connector (A-coded), Phoenix Contact P/N: 1441817
2x 5-pin M12 female connectors (A-coded), Phoenix Contact P/N: 1441778
Protection Rating
IP67
Operating Temperature
-40 to 75 °C
-40 to 167 °F
User Interface
The user programmable functionality is accessible via an embedded web server.
The firmware and internal state of the converter can be updated using a web browser.
Applications
Off-highway road machinery
Harsh industrial environments with power transients, high humidity, and vibrations
Accessories
Datasheet
User Manual
2D Drawing
Ethernet to CAN Converter Protocols
Compliance
Related Products
KIT (AX141530 Converter, AX070532 Cable, AX070534 Cable)
4 Digital Inputs Modbus Router, Modbus TCP/IP, SAE J1939
KIT (AX141560 Converter, AX070521 Cable, AX070522 Cable, AX070532 Cable)
LIN/CAN Protocol Converter, Enhanced II, SAE J1939
LIN/CAN Protocol Converter, PWM Output, CANopen®
LIN/CAN Protocol Converter, Enhanced II, CANopen®
4x Gigabit Automotive Ethernet / 1x 10 Gigabit Ethernet Switch
3x Gigabit Automotive Ethernet / 1x Gigabit Ethernet Switch
Automotive Ethernet to Wi-Fi and Bluetooth® CAN Converter
Center Bonded Mounts STA Series
Automation
Power Management
Connectivity Solutions
Machine Control
Accessories