12 RTD & 4 Universal Signal Inputs Controller, SAE J1939 1 Mbps
Item # AX184000-02 — 12 RTD & 4 Universal Signal Inputs Controller, SAE J1939 1 Mbps
The RTD Scanner monitors 12 3-wire or 2-wire RTD inputs from a diesel engine and the temperature information is provided to the engine control system over a SAE J1939 CAN bus. Each channel operates independently. Temperature information can include exhaust temperature, winding temperature, and fluid temperature monitoring. All channels of temperature data are automatically sent over the CAN bus when power is applied with no additional programming or configuration required. Integral diagnostics determine RTD integrity. RTD inputs are isolated from the CAN communication and power supply. 4 universal signal inputs are user selectable as voltage (0-5 V, 0-10 V), current (4- 20 mA, 0-20 mA), PWM (0-10 kHz), counter, or digital (active high, active low, or latched) input types. During set-up, using a USB-CAN converter and a PC, the operator can configure the controller via Axiomatic Electronic Assistant to suit a wide variety of applications.
The RTD Scanner features rugged packaging and watertight TE Deutsch equivalent connectors for an IP67 rating. The RTD Scanner is designed to meet the environmental, EMC, and vibration requirements of generator set applications.
Our products are designed to be customized by our customers and can be thought of as product foundations. Find the foundational product(s) that you need in our catalog, add them to your quote cart, then explain your requirements for your project on the quote cart submission form. If you cannot find the foundational product, please tell us your requirements.
Technical Specifications
RTD Scanner
Order Code
P/N: AX184000-02
Input(s)
12 channels for RTD inputs
All channels independently configurable for 2 or 3 wire RTDs
4 universal inputs user selectable as follows.
0-5V, 0-10V
0-20mA, 4-20mA
Frequency (0.5Hz-10kHz)
PWM (0-10kHz, 0-100%)
Counter
Digital
Communications
1 CAN port (SAE J1939)
CAN Baud Rate
1 Mbit/s
Operating Voltage
12V or 24Vdc nominal (9...32Vdc)
Enclosure
149.00 x 145.30 x 73.00 mm
5.86 x 5.72 x 2.87 inches
W x L x H Excluding Mating Connectors
Protection Rating
IP67
Operating Temperature
-40 to 85 ºC
-40 to 185 ºF
Accessories
AX070200, Plug Kit (DRC16-40S Connector, DT06-08SA Plug, W8S Wedgelock, Size 16 Sockets, Size 12-16 Sealing Plugs)
AX070502, Axiomatic Electronic Assistant KIT (AX070501 USB-CAN Converter, 2 Cables, Installation Instructions)
AX070506K, Axiomatic Electronic Assistant KIT III (AX070506 USB-CAN Converter, 3 Cables, Installation Instructions)
Datasheet
User Manual
2D Drawing
STEP File
Compliance
4 Inputs, 8 Proportional Outputs Valve Controller, CANopen®
20 Channel Thermocouple Scanner, Full Isolation, SAE J1939
4 Digital Inputs Modbus Router, Modbus TCP/IP, SAE J1939
4 Universal Signal Outputs CAN Controller, CANopen®, Compact
4 Universal Input CAN Controller, +5V/8V Reference with Feedback Signal, CANopen®
Wire Harness (DTP06-4S Mating Plug, 2m (6.5ft.) 12 AWG Unterminated Wires)
4 Inputs, 4 Outputs Isolated Controller, SAE J1939
2 RTD Inputs, 2 Outputs Intelligent Load Control Switch, CANopen®, Modbus RTU, Ethernet, Wi-Fi
12 Inputs, 12 Proportional & 2 Relay Outputs Controller, 2 SAE J1939, Ethernet
Interface Module, 16 Inputs, 15 Outputs, SAE J1939
Center Bonded Mounts STA Series
Automation
Power Management
Connectivity Solutions
Machine Control
Accessories