11 Inputs, 4 Analog, 4 Relay, and 1 Valve Output Isolated Controller, 2x CANopen®
Item # AX031201 — 11 Inputs, 4 Analog, 4 Relay, and 1 Valve Output Isolated Controller, 2x CANopen®
The AX031201 controller features 2 isolated CAN ports and 11 inputs, generates 9 outputs that are isolated from the inputs, and operates with a 12 or 24 VDC nominal (9 to 60 VDC) input voltage. The 11 inputs, 1 valve, 4 analog, and 4 relay outputs controller features reverse polarity, over-voltage, under-voltage, short-circuit, and surge and transient protections. The 2 CANopen® ports are isolated from the inputs and outputs. AX031201 is a smart controller with configurable internal architecture, providing users with flexibility and allowing them to build their own custom controller with a required functionality from a set of predefined internal functional blocks using standard CANopen® interface tools. Application programming is performed through the CAN interface without disconnecting the controller from the user’s system.
Our products are designed to be customized by our customers and can be thought of as product foundations. Find the foundational product(s) that you need in our catalog, add them to your quote cart, then explain your requirements for your project on the quote cart submission form. If you cannot find the foundational product, please tell us your requirements.
Technical Specifications
11 Inputs, 4 Analog, 4 Relay, and 1 Valve Output Isolated Controller, 2x CANopen®
Order Code
P/N: AX031201
No. of Input(s)
11
Input(s)
1 magnetic pick-up input (0.5 Hz to 10 kHz)
2 isolated digital inputs are selectable as active high or active low
4 isolated analog inputs are selectable as voltage, current, or digital
(0-5 V, 0-10 V, 0-20 mA, 4-20 mA, active high, active low)
4 fully independent universal inputs, user selectable as follows:
Voltage (0-1 V, 0-2.5 V, 0-5 V, 0-10 V)
Current (0-20 mA, 4-20 mA)
Resistive (30 Ω to 250 kΩ, self-calibrating)
Frequency/RPM (0.5 Hz to 50 Hz, 10 Hz to 1 kHz, 100 Hz to 10 kHz)
PWM (100 Hz to 10 kHz)
Digital (active high, active low)
No. of Output(s)
9
Output(s)
4 relay outputs (NO)
4 isolated analog outputs are programmable as voltage or current
(0-5 V, 0-10 V, 0-20 mA, 4-20 mA)
1 fully independent valve driver output (up to 2 A), user programmable as follows:
Proportional voltage
Proportional current
Hotshot digital
PWM duty cycle
Digital on/off
No. of Communication Port(s)
2
Communications
2 Isolated CAN ports (CANopen®)
Operating Voltage
12/24 VDC nominal (9-60 VDC)
Isolation
300 Vrms
The outputs are isolated from the inputs.
The CAN ports are isolated from both inputs and outputs.
Control Logic
Standard embedded software is provided.
A user programmable functionality is accessible.
Enclosure
High temperature nylon housing, TE Deutsch P/N: EEC-5X650B
No. of Connections
1
Connection(s)
Based on availability, the connector will be one of the following:
1x 48-pin connector, TE Deutsch P/N: DT13-48PABCD-R015
1x 48-pin connector, Amphenol Face Plate P/N: ATM13-12PA-12PB-BM03
Protection Rating
IP67
Operating Temperature
-40 to 85 ºC
-40 to 185 ºF
User Configurability
An EDS file is provided to interface with standard CANopen® configuration tools.
Applications
Off-highway machine automation
Oil and gas equipment automation
Power gen set engine control systems
Accessories
AX070123, Mating Plug Kit (DT06-12SA, DT06-12SB, DT06-12SC, DT06-12SD, 4 W12S-P012, 48 Contacts, 15 Plugs)
Datasheet
User Manual
EDS File
2D Drawing
STEP File
Compliance
4 Inputs, 8 Proportional Outputs Valve Controller, CANopen®
20 Channel Thermocouple Scanner, Full Isolation, SAE J1939
4 Digital Inputs Modbus Router, Modbus TCP/IP, SAE J1939
4 Universal Signal Outputs CAN Controller, CANopen®, Compact
4 Universal Input CAN Controller, +5V/8V Reference with Feedback Signal, CANopen®
Wire Harness (DTP06-4S Mating Plug, 2m (6.5ft.) 12 AWG Unterminated Wires)
4 Inputs, 4 Outputs Isolated Controller, SAE J1939
2 RTD Inputs, 2 Outputs Intelligent Load Control Switch, CANopen®, Modbus RTU, Ethernet, Wi-Fi
12 Inputs, 12 Proportional & 2 Relay Outputs Controller, 2 SAE J1939, Ethernet
Interface Module, 16 Inputs, 15 Outputs, SAE J1939
Center Bonded Mounts STA Series
Automation
Power Management
Connectivity Solutions
Machine Control
Accessories