KIT (AX081220 Converter, AX070538 Wire Harness, AX070539 Wire Harness)
Item # AX081220K — KIT (AX081220 Converter, AX070538 Wire Harness, AX070539 Wire Harness)
AX081220K provides one AX081220 48 VDC/24 VDC, 600 W Isolated DC-DC Converter, one AX070538 wire harness, and one AX070539 wire harness.
The AX070538 wire harness is comprised of a mating plug, TE Deutsch P/N: DTP06-4S and a cable. The cable is 2m (6.5 ft.) with 12 AWG unterminated lead wires. The AX070539 wire harness is comprised of a mating plug, TE Deutsch P/N: DTP06-8SA and a cable. The cable is 2m (6.5 ft.) with 14 AWG unterminated lead wires. The wire harnesses feature the mating plugs for the AX081220 connectors. The AX070538 wire harness mates with the 4-pin output connector and the AX070539 wire harness mates with the 8-pin input connector.
The AX081220 48 VDC/24 VDC, 600 W Isolated DC-DC Converter provides clean 24 VDC power for vehicle electronics, instrumentation, radios and other control equipment. Power from a battery or other source at 48 VDC nominal (36 to 60 VDC) is converted to a 24 VDC output regulated to 3% for a 25 Amp load. Isolation of the input and output is provided. For operation under the most harsh and demanding conditions, the power supply converter is sealed and enclosed to protect against moisture, shock and vibration. The unit is designed with extremely rugged transient suppression and short-circuit and reverse polarity protections in addition to over/under voltage protection. With a nameplate rating/output power of 600 Watts (600 VA nominal), the DC/DC converter has efficiency rated at 93%.
To purchase the AX081220 48 VDC/24 VDC, 600 W Isolated DC-DC Converter only, please visit: https://www.axiomatic.com/product/48-vdc-24-vdc-600-w-isolated-dc-dc-converter-ax081220/
Our products are designed to be customized by our customers and can be thought of as product foundations. Find the foundational product(s) that you need in our catalog, add them to your quote cart, then explain your requirements for your project on the quote cart submission form. If you cannot find the foundational product, please tell us your requirements.
Technical Specifications
1x 48 VDC/24 VDC, 600 W Isolated DC-DC Converter
1x Wire Harness (DTP06-4S Mating Plug, 2m (6.5ft.) 12 AWG Unterminated Wires)
1x Wire Harness (DT06-8SA Mating Plug, 2m (6.5ft.) 14 AWG Unterminated Wires)
Order Code
P/N: AX081220K (includes wire harnesses)
Output(s)
24 VDC +/- 3% (600 W)
Output Current
25 A continuous
Output Power
600 W nominal
Operating Voltage
48 VDC nominal (36-60 VDC)
Isolation
700 VDC
Enclosure
Cast Aluminum housing, integral gasket and connector
8.14 x 11.12 x 3.11 inches
L x W x H including integral connectors
Connection(s)
1 8-pin connector, TE Deutsch P/N: DT13-8PA
1 4-pin connector, TE Deutsch P/N: DTP13-4P
Protection Rating
IP67
Operating Temperature
-40 to 70 °C
-40 to 158 °F
Compliance
For compliance of the device, please see the compliance downloads on the device page.
Applications
Charging/cranking battery based systems
Off-highway equipment
Oilfield equipment
Power generator set control systems
Telecom
Datasheet
2D Drawing
STEP File
Compliance
Related Products
KIT (AX081220 Converter, AX070538 Wire Harness, AX070539 Wire Harness)
24VDC/24VDC, 150W Isolated Power Supply with 20 Second Back-up
CAN Enabled 24VDC to 24VDC Converter, 350W, Isolated
2 Universal Inputs, Dual H-Bridge Outputs, 10A Motor Controller, SAE J1939
KIT (AX081200 Converter, AX070538 Wire Harness, AX070539 Wire Harness)
KIT(AX080710 Power Supply, AX070165 Wire Harness)
KIT (AX080720 Power Supply, AX070165 Wire Harness)
25A Unidirectional DC Motor Controller, Encoder Input, SAE J1939
25A Unidirectional DC Motor Controller, Encoder Input, CANopen®
3 Universal Inputs, H-Bridge Output, 2.5A Motor Controller, SAE J1939
Center Bonded Mounts STA Series
Automation
Power Management
Connectivity Solutions
Machine Control
Accessories