12VDC to 48VDC, 350W Isolated Power Converter
Item # AX082210 — 12VDC to 48VDC, 350W Isolated Power Converter
AX082210 is an isolated, 12 VDC to 48 VDC converter with 350 W output power. The converter operates from 10 to 18 VDC (12 VDC nominal) with overcurrent, short-circuit, overtemperature, reverse polarity, and over/under voltage protection. The power converter has a regulated output voltage of 48 VDC, 7.3 A with an efficiency of 91%. For operation under the most harsh and demanding conditions, the unit is anodized and IP67-rated to protect against moisture, shock, and vibration and operates from -40 to 80 °C (-40 to 176 °F).
Our products are designed to be customized by our customers and can be thought of as product foundations. Find the foundational product(s) that you need in our catalog, add them to your quote cart, then explain your requirements for your project on the quote cart submission form. If you cannot find the foundational product, please tell us your requirements.
Technical Specifications
12VDC to 48VDC, 350W Isolated Power Converter
Order Code
P/N: AX082210
Output Voltage
43 to 48 VDC @ 10 to 11 VDC input
48 VDC ±1.5% @ 11 to 18 VDC input
Output Current
7.3 A continous
Output Power
350 W nominal
Operating Voltage
12 VDC nominal (10-18 VDC)
Isolation
700 VDC minimum, all to chasis
700 VDC minimum, primary and secondary
Enclosure
Anodized, cast aluminum enclosure
7.94 x 5.83 x 2.49 inches
L x W x H including integral connector
Connection(s)
1x 8-pin connector, TE Deutsch P/N: DT13-08PA
Protection Rating
IP67
Operating Temperature
-40 to 80 °C
-40 to 176 °F
Compliance
Designed for EMI/EMC compliance.
Applications
Climate control
Off-highway equipment
Datasheet
2D Drawing
Related Products
15-60VDC to 24VDC, 350W Isolated Converter, No Enable
KIT (AX080302 Converter, AX070174 Wire Harness)
24VDC to 24VDC, 350W Isolated Converter, SAE J1939
KIT (AX083160 Converter, AX070155 Wire Harness)
1 Digital Input, 2 Analog & 2 Proportional Outputs Controller, SAE J1939
1 Digital Input, 2 Analog & 2 Proportional Outputs Controller, CANopen®
2 Universal Inputs, 10A H-Bridge Output Controller, SAE J1939
24VDC to 24VDC, 350W Isolated Converter, CANopen®
3 Universal Inputs, H-Bridge Output, 5A Motor Controller, SAE J1939
KIT (AX081220 Converter, AX070538 Wire Harness, AX070539 Wire Harness)
Center Bonded Mounts STA Series
Automation
Power Management
Connectivity Solutions
Machine Control
Accessories
