24VDC to 24VDC, 350W Isolated Converter, CANopen®
Item # AX080311 — 24VDC to 24VDC, 350W Isolated Converter, CANopen®
AX080311 is an isolated 24 VDC to 24 VDC converter with an isolated CANopen® port and a regulated output of 24 VDC and 15 A with a typical efficiency of 94%. The converter operates with a power supply voltage of 10 to 40 VDC (24 VDC nominal) and provides a 350 W output power. The CANopen® connection allows for real time diagnostics, controlled shutdowns, and other helpful features. The output current limit can be set through CAN or set to vary with the measured input voltage and input/output voltage feedback is measured (can be sent over CAN bus). An EDS file is provided for use with standard CANopen® tools for configuration. AX080311 features an enable pin to turn the output on/off and a Wake-on-CAN functionality that can be used to reduce power consumption. The enable pin features a user configurable de-glitch time to keep the output on for a set amount of time after the enable pin is turned off. The AX080311 converter with CAN features over-current, short-circuit, over-temperature, reverse polarity, and over/under-voltage protections. The unit is designed for EMI/EMC compliance and is enclosed in a sealed, anodized, IP67-rated housing for operation under the most harsh and demanding conditions.
Our products are designed to be customized by our customers and can be thought of as product foundations. Find the foundational product(s) that you need in our catalog, add them to your quote cart, then explain your requirements for your project on the quote cart submission form. If you cannot find the foundational product, please tell us your requirements.
Technical Specifications
24VDC to 24VDC, 350W Isolated Converter, CANopen®
Order Code
P/N: AX080311
Input(s)
24 VDC nominal (10-40 VDC)
Enable
Provided
Output Voltage
24 VDC ± 2%
Output Current
15 A continuous
Output Power
350 W nominal
No. of Communication Port(s)
1
CAN Port(s)
1 CANopen® port
CAN Baud Rate
10 kbit/s, 20 kbit/s, 50 kbit/s, 125 kbit/s, 250 kbit/s, 500 kbit/s, 667 kbit/s, and 1 Mbit/s are supported
Isolation
Enable input isolated to primary and secondary
700 VDC minimum, all to chassis
700 VDC minimum, primary to secondary
Control Logic
A user programmable functionality is accessible.
Enclosure
Anodized, cast aluminum enclosure
8.0" x 5.83" x 2.49"
L x W x H including integral connector
Connection(s)
1x 12-pin connector, TE Deutsch P/N: DTM13-12PA
Protection Rating
IP67
Operating Temperature
-40 to 85 ºC
-40 to 185 ºF
Compliance
Designed for EMI/EMC compliance
User Configurability
The user programmable functionality is accessible using standard CANopen® tools.
An EDS file is provided to interface with standard CANopen® configuration tools.
Applications
Agricultural equipment
Lift equipment
Mining equipment
Municipal vehicles
Off-highway equipment
Utility vehicles
Datasheet
User Manual
EDS File
2D Drawing
Related Products
24VDC to 24VDC, 350W Isolated Converter, CANopen®
3 Universal Inputs, H-Bridge Output, 5A Motor Controller, SAE J1939
KIT (AX081220 Converter, AX070538 Wire Harness, AX070539 Wire Harness)
24VDC/24VDC, 150W Isolated Power Supply with 20 Second Back-up
2 Universal Inputs, Dual H-Bridge Outputs, 10A Motor Controller, SAE J1939
KIT (AX081200 Converter, AX070538 Wire Harness, AX070539 Wire Harness)
KIT(AX080710 Power Supply, AX070165 Wire Harness)
KIT (AX080720 Power Supply, AX070165 Wire Harness)
25A Unidirectional DC Motor Controller, Encoder Input, SAE J1939
25A Unidirectional DC Motor Controller, Encoder Input, CANopen®
3 Universal Inputs, H-Bridge Output, 2.5A Motor Controller, SAE J1939
Center Bonded Mounts STA Series
Automation
Power Management
Connectivity Solutions
Machine Control
Accessories
