KIT (AX083100 Converter, WH-DT06-4S-S-16AWG-2M Wire Harness)
Item # AX083100K — KIT (AX083100 Converter, WH-DT06-4S-S-16AWG-2M Wire Harness)
AX083100K provides one AX083100 24VDC to 48VDC, 60W Isolated Converter and one WH-DT06-4S-S-16AWG-2M wire harness.
The WH-DT06-4S-S-16AWG-2M wire harness is comprised of a mating plug, TE Deutsch P/N: DTP06-4S and a cable. The cable is 2m (6.5ft.) with 16 AWG unterminated wires. The wire harness mates with the 4-pin connector attached to the AX083100 converter.
The AX083100 24 VDC to 48 VDC, 60 W Isolated Converter provides regulated 48 VDC power suitable for instrumentation and controls operating in a battery powered system. Power from a battery or other source at 24 VDC nominal (9 to 60 VDC) is converted to a 48 VDC output regulated to 3% and 1.3 Amp continuous current. Input and output isolation is provided. The AX083100 isolated converter is designed with extremely rugged surge and transient suppression in addition to sustained over/under voltage protection as well as inrush current control. For operation under the most harsh and demanding conditions, the unit is fully sealed and enclosed to protect against moisture, shock, and vibration. With 60 Watts of output power, the DC-DC Converter has an efficiency rated at 89%.
A separate model is available without the mating wire harness as AX083100, 24 VDC to 48 VDC, 60 W Isolated Converter.
Our products are designed to be customized by our customers and can be thought of as product foundations. Find the foundational product(s) that you need in our catalog, add them to your quote cart, then explain your requirements for your project on the quote cart submission form. If you cannot find the foundational product, please tell us your requirements.
Technical Specifications
1x 24VDC to 48VDC Converter, 60W Isolated
1x Wire Harness, DT06-4S Assembly, 2 meters, 16 AWG, Unterminated Cable
Order Code
KIT P/N: AX083100K (includes wire harness)
Output(s)
48 VDC +/- 2.7%
Output Current
1.3 A continuous
Output Power
60 W nominal
Operating Voltage
24 VDC nominal (9-60 VDC)
Isolation
Isolated from input, output and chassis ground
700 VDC between primary and secondary
Enclosure
Aluminum enclosure, encapsulated
3.76 x 6.12 x 1.93 inches
(W x L x H Including Connector)
Connection(s)
1x 4-pin receptacle, TE Deutsch P/N: DTP15-4P
Protection Rating
IP67
Operating Temperature
-40 to 85 ºC
-40 to 185 ºF
Compliance
For compliance of the device, please see the compliance downloads on the device page.
Applications
Charging/Cranking Battery Based Power Supply Systems
Off-Highway Equipment Control Systems
Power Conditioning for Controls & Instrumentation
Power Radio Equipment
Datasheet
2D Drawing
STEP File
Compliance
KIT (AX081220 Converter, AX070538 Wire Harness, AX070539 Wire Harness)
24VDC/24VDC, 150W Isolated Power Supply with 20 Second Back-up
CAN Enabled 24VDC to 24VDC Converter, 350W, Isolated
2 Universal Inputs, Dual H-Bridge Outputs, 10A Motor Controller, SAE J1939
KIT (AX081200 Converter, AX070538 Wire Harness, AX070539 Wire Harness)
KIT(AX080710 Power Supply, AX070165 Wire Harness)
KIT (AX080720 Power Supply, AX070165 Wire Harness)
25A Unidirectional DC Motor Controller, Encoder Input, SAE J1939
25A Unidirectional DC Motor Controller, Encoder Input, CANopen®
3 Universal Inputs, H-Bridge Output, 2.5A Motor Controller, SAE J1939
Center Bonded Mounts STA Series
Automation
Power Management
Connectivity Solutions
Machine Control
Accessories