RS-232 to CAN Converter with Two Digital Inputs, SAE J1939
Item # AX030350 — RS-232 to CAN Converter with Two Digital Inputs, SAE J1939
The RS-232 to CAN Converter with Two Digital Inputs is a compact device for interfacing RS-232 satellite phones or GPS systems with CAN bus (SAE J1939) in on-road commercial vehicles.
The RS-232 serial port interface is provided with user-configurable frame forwarding system to convert serial port messages into CAN frames. Likewise, the two fully isolated CAN interfaces have user-configurable CAN ID filtering and frame forward system, to convert CAN frames into serial port messages. By default, the primary CAN port supports J1939 messaging and uses passive baud rate discovery to detect CAN network baud rate. In addition, two digital signal inputs are provided. The inputs can be configured to measure frequency, RPM, PWM, and digital signals. Measured input data can be sent to an SAE J1939 network or used to enable/disable frame forwarding. The Axiomatic Electronic Assistant is used to configure the controller.
Our products are designed to be customized by our customers and can be thought of as product foundations. Find the foundational product(s) that you need in our catalog, add them to your quote cart, then explain your requirements for your project on the quote cart submission form. If you cannot find the foundational product, please tell us your requirements.
Order Code
P/N: AX030350
Input(s)
2 digital inputs user-programmable as follows.
Frequency, RPM, or PWM (0.5 Hz - 10 kHz)
Digital
Communications
1 RS-232 port
2 isolated CAN ports (SAE J1939)
CAN Baud Rate
250 kbit/s, 500 kbit/s, 667 kbit/s, and 1 Mbit/s with auto-baud-rate detection
Operating Voltage
12 Vdc or 24 Vdc Nominal (9 to 60 Vdc)
Control Logic
Standard embedded software is provided.
Enclosure
Plastic enclosure, ultrasonically welded
Nylon 6-6 with 30% glass fill
Integral connector
Connection(s)
Integral 12-pin receptacle (equivalent to TE Deutsch P/N: DTM04-12PA)
Operating Temperature
-40 to 85 ºC
-40 to 185 ºF
User Interface
The user programmable functionality is accessible using the Axiomatic Electronic Assistant (EA), P/N: AX070502 or P/N: AX070506K
Applications
Interfaces RS-232 satellite phones or GPS systems with CAN bus in on-road commercial vehicles
Accessories
PL-DTM06-12SA, Mating Plug KIT (DTM06-12SA, WM-12S, 12 Contacts, 6 Plugs)
AX070502, Axiomatic Electronic Assistant KIT (AX070501 USB-CAN Converter, 2 Cables, Installation Instructions)
AX070506K, Axiomatic Electronic Assistant KIT III (AX070506 USB-CAN Converter, 3 Cables, Installation Instructions)
Datasheet
User Manual
2D Drawing
Compliance
10 Universal Signal Inputs Controller, +5V Reference, SAE J1939
4 Inputs, 8 Proportional Outputs Valve Controller, CANopen®
KIT (AX141530 Converter, AX070532 Cable, AX070534 Cable)
20 Channel Thermocouple Scanner, Full Isolation, SAE J1939
4 Digital Inputs Modbus Router, Modbus TCP/IP, SAE J1939
KIT (AX141560 Converter, AX070521 Cable, AX070522 Cable, AX070532 Cable)
4 Universal Signal Outputs CAN Controller, CANopen®, Compact
LIN/CAN Protocol Converter, Enhanced II, SAE J1939
LIN/CAN Protocol Converter, PWM Output, CANopen®
LIN/CAN Protocol Converter, Enhanced II, CANopen®
4 Universal Input CAN Controller, +5V/8V Reference with Feedback Signal, CANopen®
Center Bonded Mounts STA Series
Automation
Power Management
Connectivity Solutions
Machine Control
Accessories