Wake-On-Charge Module, CAN 2.0B, SAE J1772 Compliant
Item # AX130601 — Wake-On-Charge Module, CAN 2.0B, SAE J1772 Compliant
The AX130601 Wake-On-Charge Module is in planned obsolescent phase. It is not being superseded by a newer model at this time.
The wake-on-charge module manages the vehicle controller's power mode for wake and sleep and displays a charger status indication when the vehicle is plugged in (on-charge). The AX130601 module features a CAN 2.0B port. Diagnostics, programming, and calibration configurations are performed with a toolset compatible with Kvaser Leaf Light Rugged CAN-USB hardware (not supplied). The primary function of the AX130601 wake-on-charge module is to wake the vehicle control unit (VCU) and control status LEDs for the charger when the vehicle is plugged in to charge.
The on-vehicle charger shares the control pilot signal input with the wake-on-charge device, waking the module and, in turn, enabling an output to wake the VCU. The LED outputs are controlled by the settings last received from the VCU. The wake-on-charge module will sleep or re-wake the VCU either if the 12 VDC battery input voltage goes below a controlled threshold or after a controlled timer delay. Removal of the control pilot input signal after the VCU goes to sleep also sends the wake-on-charge module to sleep. The AX130601 wake-on-charge module is designed to operate in an under-hood automotive environment and handle electrostatic discharge (ESD).
Our products are designed to be customized by our customers and can be thought of as product foundations. Find the foundational product(s) that you need in our catalog, add them to your quote cart, then explain your requirements for your project on the quote cart submission form. If you cannot find the foundational product, please tell us your requirements.
Technical Specifications
Wake-On-Charge Module, CAN 2.0B, SAE J1772 Compliant
Order Code
P/N: AX130601
Input(s)
1 control pilot signal input triggers the module to wake up within 100 mSec
Output(s)
1 output (200 mA, high side)
Acts as a Wake command to the vehicle control unit or other controls/relay coils
LED Outputs
2 LED outputs (up to 50 mA)
Communications
1 CAN 2.0B port
CAN Baud Rate
500 kbit/s
Operating Voltage
12 VDC nominal (6-16 VDC)
Control Logic
Standard embedded software is provided.
A user programmable functionality is accessible.
Enclosure
Encapsulated, cast aluminum housing with mounting holes
Integral TE Deutsch equivalent connector
Connection(s)
1x 8-pin connector, equivalent to TE Deutsch P/N: DT15-8PA
Protection Rating
IP67 rating for the product assembly.
Operating Temperature
Outside ambient air: -40 to 50 °C (-40 to 122 °F)
Under hood: -40 to 85 °C (-40 to 185 °F)
Compliance
Complies with the “Class A” functional requirements of the following standards:
Ford EY-0128/CETP 00.00-E-412
Ford ES-XW7T-1A278-AC
GMW 3100/3097
GMW 3172
IEC/EN 60529
ISO 16750
SAE J1455
User Interface
User diagnostics, programming, and calibrations are accessible with a Kvaser Leaf Light Rugged CAN-USB hardware compatible toolset (not supplied).
Applications
Electric Vehicles
Accessories
AX070112, Mating Plug Kit (DT06-08SA, W8S, 8 Contacts, 6 Plugs)
Datasheet
2D Drawing
STEP File
Compliance
Related Products
40A DC Motor Controller, Revision P2.1, SAE J1939
KIT (AX080203 Converter, AX070115 Wire Harness)
KIT (AX080200 Converter, AX070103 Wire Harness)
Wake-On-Charge Module, CAN 2.0B, SAE J1772 Compliant
Magnetic Pickup Input to CAN Converter, SAE J1939, 250 kbps
CAN + I/O Wire Harness for AX100100 Motor Controller, 2M
KIT - 3 Wire Harnesses for AX100100 Motor Controller, 2M
8 Inputs, 5 Outputs, Valve Controller, SAE J1939
Center Bonded Mounts STA Series
Automation
Power Management
Connectivity Solutions
Machine Control
Accessories