48VDC/26VDC, 13A Converter
The DC-DC Converter provides regulated 26VDC/24VDC power suitable for solenoids, relays and other electrical systems. For operation under the most harsh and demanding conditions, the IP67 rated unit protects against moisture, shock and vibration. Power from a battery or other source of 48VDC is converted to a 24-26VDC output. The unit has a high current output capability of 13 Amps. The device manages heat dissipation and requires no forced cooling systems. Short-circuit and reverse polarity protections are provided. The compact unit is designed with extremely rugged surge and transient suppression in addition to sustained over/under voltage protection. With a nameplate rating of 330 Watts of output power, the DC-DC Converter provides proprietary dual-phase topology for a high efficiency of >95%.
Our products are designed to be customized by our customers and can be thought of as product foundations. Find the foundational product(s) that you need in our catalog, add them to your quote cart, then explain your requirements for your project on the quote cart submission form. If you cannot find the foundational product, please tell us your requirements.
Order Code
P/N: AX081801 (Converter Only)
Input(s)
48 VDC Nominal (36-72 VDC)
Output(s)
23.5-26.5 VDC Maximum
Factory set at 26 VDC +/- 0.5% (330 W)
Output Current
13 A Continuous
Isolation
Not provided
Enclosure
5.35 x 7.00 x 2.39 inches
W x L x H Including Connector
Connection(s)
1 4-pin TE Deutsch P/N: DTP13-4P
Protection Rating
IP67
Operating Temperature
-40 to 85 ºC
-40 to 185 ºF
Applications
Designed to interface between 48 VDC batteries and 26/24 VDC electrical systems such as solenoids, relays, and other electrical systems found on mobile equipment, lift trucks, and buses.
Accessories
WH-DTP06-4S-S-2M, Wire Harness, DTP06-4S Assembly, 2 meters, 12 AWG, Unterminated Cable
Datasheet
2D Drawing
STEP File
Compliance
Related Products
3 Universal Inputs, H-Bridge Output, 5A Motor Controller, SAE J1939
KIT (AX081220 Converter, AX070538 Wire Harness, AX070539 Wire Harness)
24VDC/24VDC, 150W Isolated Power Supply with 20 Second Back-up
CAN Enabled 24VDC to 24VDC Converter, 350W, Isolated
2 Universal Inputs, Dual H-Bridge Outputs, 10A Motor Controller, SAE J1939
KIT (AX081200 Converter, AX070538 Wire Harness, AX070539 Wire Harness)
KIT(AX080710 Power Supply, AX070165 Wire Harness)
KIT (AX080720 Power Supply, AX070165 Wire Harness)
25A Unidirectional DC Motor Controller, Encoder Input, SAE J1939
25A Unidirectional DC Motor Controller, Encoder Input, CANopen®
3 Universal Inputs, H-Bridge Output, 2.5A Motor Controller, SAE J1939
Center Bonded Mounts STA Series
Automation
Power Management
Connectivity Solutions
Machine Control
Accessories