Single Valve Controller, Plug-In, 1 Signal Input
Item # AX023100 — Single Valve Controller, Plug-In, 1 Signal Input
The Single Plug-In Hydraulic Valve Controller is a user programmable distributed electronic control. The machine designer can configure the electronic control for their agricultural equipment or construction machine application. It drives one proportional hydraulic solenoid in response to a single command input signal from a joystick, potentiometer or other input. The control is designed to be mounted directly on the hydraulic valve with molded Deutsch IPD connectors and provides distributed control on the mobile machine. It is ruggedly packaged with IP67 protection.
Our products are designed to be customized by our customers and can be thought of as product foundations. Find the foundational product(s) that you need in our catalog, add them to your quote cart, then explain your requirements for your project on the quote cart submission form. If you cannot find the foundational product, please tell us your requirements.
Order Code
P/N: AX023100
Input(s)
1 signal input, user selectable as follows.
Voltage (0-5 V)
Current (4-20 mA)
PWM (100 Hz-10 kHz)
Output(s)
The proportional type output drives 1 hydraulic valve, user selectable as follows.
Voltage (0-Vps)
Current (0-2.5 A)
PWM duty cycle (0-100%)
Operating Voltage
12/24 VDC nominal (9-32 VDC)
Control Logic
Standard embedded software provided
User programmable setpoints and control profiles via the Axiomatic Local Controller Single EWRITE service tool with the configuration cable, P/N: AX070120
Enclosure
Molded Enclosure, integral connectors
Polyester, 30% glass
Silicone seal
Connection(s)
1 6-pin integral connector, equivalent to TE Deutsch P/N: DT04-6P
1 2-pin integral connector, equivalent to TE Deutsch P/N: DT06-2S
Protection Rating
IP67
Operating Temperature
-40 to 85 ºC
-40 to 185 ºF
Applications
Agricultural equipment
Off-highway (mobile) equipment
Datasheet
User Manual
2D Drawing
Step Files (3D)
Compliance
10 Universal Signal Inputs Controller, +5V Reference, SAE J1939
4 Inputs, 8 Proportional Outputs Valve Controller, CANopen®
20 Channel Thermocouple Scanner, Full Isolation, SAE J1939
4 Digital Inputs Modbus Router, Modbus TCP/IP, SAE J1939
4 Universal Signal Outputs CAN Controller, CANopen®, Compact
4 Universal Input CAN Controller, +5V/8V Reference with Feedback Signal, CANopen®
Wire Harness (DTP06-4S Mating Plug, 2m (6.5ft.) 12 AWG Unterminated Wires)
4 Inputs, 4 Outputs Isolated Controller, SAE J1939
2 RTD Inputs, 2 Outputs Intelligent Load Control Switch, CANopen®, Modbus RTU, Ethernet, Wi-Fi
12 Inputs, 12 Proportional & 2 Relay Outputs Controller, 2 SAE J1939, Ethernet
Interface Module, 16 Inputs, 15 Outputs, SAE J1939
Center Bonded Mounts STA Series
Automation
Power Management
Connectivity Solutions
Machine Control
Accessories