Item # AX130600 — Wake-On-Charge Module, CAN 2.0B
This product is obsolete. For units in the field, the documentation downloads section is retained on our website. In many cases, the product has been superseded by another newer model.
The wake-on-charge module manages the vehicle controller power mode for wake and sleep. It has a charger status indication when the vehicle is plugged in (on-charge). It features a CAN 2.0B port.
It performs the following functions.
The primary function of the module is to wake the Vehicle Control Unit (VCU) and control status LEDs for the charger when the vehicle is plugged in to charge. The on-vehicle charger shares the Control Pilot signal input with the Wake-on-charge module. This input wakes up the Wake-on-charge module which in turn enables an output to wake the VCU. Control of the LED output drivers is in response to CAN messages from the VCU. When the VCU is ready to shut down the following can occur. The LEDs are controlled by the last received settings from the VCU command and the Wake-on-charge module will either sleep or re-wake the VCU after a controlled timer delay or if the 12 VDC battery input voltage goes below a controlled threshold. Removal of the Control Pilot input signal after the VCU goes to sleep also sends the Wake-on-charge module to sleep. The unit ships with factory defaults. The end user must configure the unit for their application.
Our products are designed to be customized by our customers and can be thought of as product foundations. Find the foundational product(s) that you need in our catalog, add them to your quote cart, then explain your requirements for your project on the quote cart submission form. If you cannot find the foundational product, please tell us your requirements.
Order Code
P/N: AX130600
Input(s)
1 Control Pilot input signal
Detects when a Control Pilot signal is present and triggers the module to wake up within 100 ms
Reads the PWM duty cycle of the Control Pilot signal input (3-95% D.C.) from an EVSE (Electric Vehicle Supply Equipment)
Impedance compatible with SAE J1772 Vehicle State B and C
Output(s)
1 output (200 mA, high side)
Acts as a Wake command to the vehicle control unit or other controls/relay coils
Communications
1 CAN 2.0B port
CAN Baud Rate
500 kbit/s
Operating Voltage
12Vdc nominal (6...16Vdc power supply range)
Control Logic
Module Wake/Sleep
VCU Wake/Sleep
Delayed Module Sleep/VCU Re-wake
Control of power mode
LED Control (separately)
Status Feedback over CAN of all inputs and outputs
Enclosure
Encapsulated, cast aluminum housing with mounting holes
Integral TE Deutsch equivalent connector
Operating Temperature
-40 to 50 ºC
-40 to 122 ºF
Applications
Electric Vehicles
Datasheet
Step Files (3D)
Compliance
Related Products
KIT (AX080203 Converter, AX070115 Wire Harness)
KIT (AX080200 Converter, AX070103 Wire Harness)
SAE J1939 CAN <-> Modbus RTU <-> Modbus TCP/IP Protocol Converter
Protocol Converter, Ethernet / RS-422 / 2 RS-232 / SAE J1939 CAN
KIT (AX142100 Protocol Converter, Ethernet / RS-422 / 2 RS-232 / SAE J1939 CAN, AX070533 Cable, AX070531 Cable)
CAPV-H-4-20MA-1.2A-4C-7M Connector Amplifier, 4-20 mA Input, 1.2A Output, DIN 43650A, 7m Cable
Quadrature Encoder Input, Dual Valve Controller, SAE J1939
Quadrature Encoder Inputs, Dual Valve Controller, SAE J1939, 500 kbps
Quadrature Encoder Inputs, Dual Valve Controller, SAE J1939, 1 Mbps
Center Bonded Mounts STA Series
Automation
Power Management
Connectivity Solutions
Machine Control
Accessories