40A DC Motor Controller, SAE J1939
Item # AX102100 — 40A DC Motor Controller, SAE J1939
The 40 A DC motor controller features unidirectional or bi-directional DC motor control with fully isolated inputs. AX102100 features two universal signal inputs, three digital inputs, and one output to a DC motor. An additional two isolated signal outputs with overcurrent protection up to 4 A drive accessories such as hydraulic valves or relays for machine control/safety interlock. The DC motor controller features configurable and independent ramps for smooth motor rotation, protecting the controller and the system. Setpoint configuration for AX102100 is via the Axiomatic Electronic Assistant. The unit features a compact size for easy mounting on a vehicle.
Our products are designed to be customized by our customers and can be thought of as product foundations. Find the foundational product(s) that you need in our catalog, add them to your quote cart, then explain your requirements for your project on the quote cart submission form. If you cannot find the foundational product, please tell us your requirements.
Technical Specifications
40A DC Motor Controller, Revision P2.1, SAE J1939
Order Code
P/N: AX102100
Input(s)
3 isolated digital inputs (one input acts as an STO or E-Brake safety interlock)
2 isolated universal signal inputs, user configurable as follows:
Voltage (0-5 V, 0-10 V)
Current (0-20 mA, 4-20 mA)
PWM (1 Hz to 20 kHz)
Digital (active high/active low)
Output(s)
2 outputs, user selectable as follows:
Proportional voltage
Proportional current
Hotshot digital
PWM
Digital on/off
Overcurrent protection up to 4 A
Output To Motor
1 full H-bridge output for forward and reverse DC motor or brake operation
50 A @ 24 VDC nominal for 2 minutes at room temperature
40 A @ 24 VDC nominal for 1 hour minimum
Overcurrent protection up to ±75 A for each output leg
CAN Port(s)
1 SAE J1939 port
CAN Baud Rate
250 kbit/s, 500 kbit/s, 667 kbit/s, and 1 Mbit/s with auto-baud-rate detection
Operating Voltage
12/24/48 VDC nominal (8-60 VDC)
Isolation
Provided
Control Logic
Standard embedded software is provided.
The user programmable functionality is accessible using the Axiomatic Electronic Assistant (EA), P/N: AX070502 or P/N: AX070506K
Enclosure
Encapsulated, anodized cast aluminum housing with lid gasket
Connection(s)
1x 4-pin connector, Molex P/N: 19436-0411
1x 12-pin connector, TE Deutsch P/N: DTM13-12PA
Protection Rating
IP67
Operating Temperature
-40 to 85 ºC
-40 to 185 ºF
Applications
Motor variable speed, position, and/or flow control for a number of applications including:
Cranes and hoists
Electric vehicles for material handling
Golf carts
Hydraulic power packs
Hydraulic tail lifts and winches
Military and lift equipment
Mobile pumps
Accessories
AX070137, Wire Harness, 2m for AX102100 and AX102101
PL-DTM06-12SA, Mating Plug KIT (DTM06-12SA, WM-12S, 12 Contacts, 6 Plugs)
AX070502, Axiomatic Electronic Assistant KIT (AX070501 USB-CAN Converter, 2 Cables, Installation Instructions)
AX070506K, Axiomatic Electronic Assistant KIT III (AX070506 USB-CAN Converter, 3 Cables, Installation Instructions)
Datasheet
User Manual
2D Drawing
STEP File
Compliance
Related Products
3 Universal Inputs, H-Bridge Output, 5A Motor Controller, SAE J1939
KIT (AX081220 Converter, AX070538 Wire Harness, AX070539 Wire Harness)
24VDC/24VDC, 150W Isolated Power Supply with 20 Second Back-up
CAN Enabled 24VDC to 24VDC Converter, 350W, Isolated
2 Universal Inputs, Dual H-Bridge Outputs, 10A Motor Controller, SAE J1939
KIT (AX081200 Converter, AX070538 Wire Harness, AX070539 Wire Harness)
KIT(AX080710 Power Supply, AX070165 Wire Harness)
KIT (AX080720 Power Supply, AX070165 Wire Harness)
25A Unidirectional DC Motor Controller, Encoder Input, SAE J1939
25A Unidirectional DC Motor Controller, Encoder Input, CANopen®
3 Universal Inputs, H-Bridge Output, 2.5A Motor Controller, SAE J1939
Center Bonded Mounts STA Series
Automation
Power Management
Connectivity Solutions
Machine Control
Accessories