4 Inputs, 6A BLDC Motor Controller, +5V Reference, CANopen®
Item # AX100261 — 4 Inputs, 6A BLDC Motor Controller, +5V Reference, CANopen®
The BLDC Motor Controller has three universal inputs that can be configured to measure voltage, current, frequency, PWM duty cycle, resistance or digital voltage level (on/off). A fourth input can be an analog input (voltage, current or resistive type). It accepts 12 VDC or 24 VDC nominal input power. The controller can drive brushless DC motors equipped with Hall sensors up to 100 W nominal. Sensorless motor control using Back-EMF rotor position detection is also supported. Refer to Figure 1.0. Measured input data can be sent to a CANopen® network as is or used in the BLDC controller function blocks for controlling how the BLDC motor is driven. A rugged enclosure, IP67 rating and high temperature operation up to 125ºC ensure that the controller is suitable for mounting in harsh equipment environments.
Our products are designed to be customized by our customers and can be thought of as product foundations. Find the foundational product(s) that you need in our catalog, add them to your quote cart, then explain your requirements for your project on the quote cart submission form. If you cannot find the foundational product, please tell us your requirements.
Order Code
P/N: AX100261 (CANopen, 1KΩ Hall Effect Pull-up)
Input(s)
1 input is user configurable as:
Voltage
Current
Resistive types
3 universal inputs are user selectable as:
Voltage
Current
Resistive
PWM
Frequency
Digital types
Motor Feedback
Hall Effect Sensor, 1KΩ pull-up to +5 VDC per input
Sensorless operation is also available
Output To Motor
3 phase, H-bridge output
Current sensing each phase
Output Current
6 A continuous @ 12 VDC nominal
6 A continuous @ 24 VDC nominal
100 W nominal
Communications
1 CAN port (CANopen®)
Operating Voltage
12/24 VDC nominal (9-36 VDC)
Control Logic
Standard embedded software is provided.
Enclosure
High temperature nylon housing, TE Deutsch P/N: EEC-325X4B
Connection(s)
1x 24-pin receptacle connector equivalent to TE Deutsch P/N: DTM13-12PA-12PB-R008
Protection Rating
IP67
Operating Temperature
-40 to 125 ºC
-40 to 257 ºF
Applications
Motor variable speed, position and/or flow control in Lift Equipment
Electric Vehicles for Material Handling
Cranes and Hoists
Hydraulic Tail Lifts and Winches
Golf Carts
Military Equipment
Mobile Pumps
Hydraulic Power Packs
Accessories
PL-DTM06-12SA-12SB Mating Plug KIT (DTM06-12SA, DTM06-12SB, 2 WM-12S, 24 Contacts, Plugs)
Datasheet
User Manual
EDS File
2D Drawing
STEP File
Compliance
KIT (AX081220 Converter, AX070538 Wire Harness, AX070539 Wire Harness)
24VDC/24VDC, 150W Isolated Power Supply with 20 Second Back-up
CAN Enabled 24VDC to 24VDC Converter, 350W, Isolated
2 Universal Inputs, Dual H-Bridge Outputs, 10A Motor Controller, SAE J1939
KIT (AX081200 Converter, AX070538 Wire Harness, AX070539 Wire Harness)
KIT(AX080710 Power Supply, AX070165 Wire Harness)
KIT (AX080720 Power Supply, AX070165 Wire Harness)
25A Unidirectional DC Motor Controller, Encoder Input, SAE J1939
25A Unidirectional DC Motor Controller, Encoder Input, CANopen®
3 Universal Inputs, H-Bridge Output, 2.5A Motor Controller, SAE J1939
Center Bonded Mounts STA Series
Automation
Power Management
Connectivity Solutions
Machine Control
Accessories