40A BLDC Motor Controller, CANopen®
Item # AX100251 — 40A BLDC Motor Controller, CANopen®
The 40 A DC Motor Controller features Unidirectional or bi-directional BLDC motor control with hall effect sensor feedback. A user configurable enable function can be mapped to any of the 2 digital inputs or a CAN message. 1 current output (2.5 A proportional or hotshot digital) is available to drive accessories such as hydraulic valves or relays for machine control or safety interlock. Use the Electronic Assistant for setpoint configuration. The drive is IP67 rated.
Our products are designed to be customized by our customers and can be thought of as product foundations. Find the foundational product(s) that you need in our catalog, add them to your quote cart, then explain your requirements for your project on the quote cart submission form. If you cannot find the foundational product, please tell us your requirements.
Order Code
P/N: AX100251 (CANopen)
Input(s)
1 digital input, selectable as frequency (0.5 Hz to 10 kHz), PWM (0.5 Hz to 10 kHz), or digital (active high/active low)
2 universal or resistive signal inputs are user selectable as follows:
Voltage (0-5 VDC, 0-10 VDC)
Current (0-20 mA, 4-20 mA)
Resistive (30 Ω to 250 kΩ)
Frequency (0.5 Hz to 10 kHz)
PWM (0.5 Hz to 10 kHz)
Digital (active high/active low)
For encoder inputs, please contact Axiomatic.
Motor Feedback
Hall Effect Sensor, 10KΩ pull-up to +5 VDC per input
Sensorless operation is also available
Output(s)
1 analog output is selectable as voltage or current (0-5 V, 0-10 V, 0-20 mA, 4-20 mA)
1 universal output up to 2.5 A is user programmable as follows:
Proportional Current
Hotshot Digital
PWM
Digital on/off
Half-bridge
Output Current
40 A continuous
Communications
1 CAN port (CANopen®)
Operating Voltage
12/24/48 VDC Nominal (9-65 VDC)
Control Logic
Standard embedded software is provided.
Enclosure
Encapsulated in an anodized aluminum extrusion with gasket
Connection(s)
1 2-pin connector equivalent to the Molex P/N: 19436-0213
1 3-pin connector equivalent to the TE Deutsch P/N: HD10-3-96P
1 12-pin connector equivalent to the TE Deutsch P/N: DTM13-12PA
Protection Rating
IP67
Operating Temperature
-40 to 85 ºC
-40 to 185 ºF
Applications
Motor variable speed, position, and/or flow control for a number of applications including:
Cranes and hoists
Electric vehicles for material handling
Golf carts
Hydraulic power packs
Hydraulic tail lifts and winches
Military and lift equipment
Mobile pumps
Accessories
AX070450, Mating Plug Kit
Datasheet
User Manual
2D Drawing
EDS File
3D Model
Compliance
Related Products
24VDC to 24VDC, 350W Isolated Converter, CANopen®
3 Universal Inputs, H-Bridge Output, 5A Motor Controller, SAE J1939
KIT (AX081220 Converter, AX070538 Wire Harness, AX070539 Wire Harness)
24VDC/24VDC, 150W Isolated Power Supply with 20 Second Back-up
2 Universal Inputs, Dual H-Bridge Outputs, 10A Motor Controller, SAE J1939
KIT (AX081200 Converter, AX070538 Wire Harness, AX070539 Wire Harness)
KIT(AX080710 Power Supply, AX070165 Wire Harness)
KIT (AX080720 Power Supply, AX070165 Wire Harness)
25A Unidirectional DC Motor Controller, Encoder Input, SAE J1939
25A Unidirectional DC Motor Controller, Encoder Input, CANopen®
3 Universal Inputs, H-Bridge Output, 2.5A Motor Controller, SAE J1939
Center Bonded Mounts STA Series
Automation
Power Management
Connectivity Solutions
Machine Control
Accessories
